While traditional methods of advertising can quickly become outdated and lose their impact on your audience, a wrap will provide long-lasting exposure for years to come. A wrap can be designed to convey a specific message, showcase products, or include contact information that is easily readable and memorable. In fact, a single wrapped vehicle can generate up to 12 million views per year, which is significantly higher than the 97% message recall rate for traditional billboards.
When you work with a professional wrap company, you will have access to expert installation and design support throughout the entire process. This can save you a lot of time and frustration and help your wrap project to go as smoothly as possible. In addition, a professional wrapping company will have hundreds of hours of hands-on experience with a variety of different vehicles, so they know how to avoid common mistakes and make your wrap look its best.
The most important thing to do before a wrap install is to clean the surface of your vehicle, paying special attention to areas that will be covered with adhesive. Remove any dust, dirt, mud, wax, oil, protective-type products, and anything else that could interfere with adhering the vinyl film to the vehicle. Leaving any of these contaminants behind can cause the wrap to fail within a short period of time.
It is also a good idea to get the paint job on your vehicle inspected before you have a wrap installed. If the factory paint is chipping, flaking, or peeling, it should be repainted before having a wrap put on. This is because putting a wrap on top of failing paint will only mask the problem and ultimately cause it to return. A vehicle wrap is a full or partial advertising graphic that transforms your business car, truck, SUV, van, or other motor vehicle into a mobile billboard. This dynamic marketing tool is highly cost-effective and can yield tremendous visibility for your business when used wisely. For more questions about car wrapping installation visit this site https://www.fortcollinssigncompany.com/vehicle-wraps/.
Lastly, you should have all your measurements and sketches prepared for the installer before they drop off your vehicle. This will help them to avoid making any unnecessary cuts and to ensure that they have enough material for the project. Measurements should be taken carefully, and you should always add a few inches to each side for handling and maneuvering the vinyl. You should also try to make each panel as close to the same size as possible – otherwise you’ll end up with a seam that will be more noticeable than the rest of the wrap.
If you are ready to see the benefits of a vehicle wrap for your business, contact the team at One Source Media today. We are happy to answer your questions and to help you create a custom, eye-catching wrap for your fleet of cars or truck. We offer a wide range of colors to choose from, as well as custom graphics, so you can find the perfect look for your business.